ANI Callback much better than a calling card !
You can register your home phone number(e.g. 02xxxxxxxx or your mobile phone 04xxxxxxxx) below to enable your use of the ANI callback service.
With ANI callback you don't even need any Internet connection to make VoIP calls.
Current CallerIDs:
| CallerID | Action |
To use the ANI CALLBACK service, first dial the access number (02)8188-1911 from your regular PSTN phone (your phone number should have been added (registered) in the above step before you use ANI callback). When you dial the access number you will get disconnected (so that you will not get charged for calling the callback access number). At this point please just hang up your phone. This is *important*, please remember to hangup the phone quickly, e.g. 2~3 seconds after punch in the callback number, you don't need to wait for the busy signal or message saying the number is unreachable. This is to ensure your line is not engaged or goes to voicemail(if your phone has one) by the time the callback system trying to call your number.
In a few seconds your phone should ring, please pick it up and you will hear your account balance followed by "Please enter the number you wish to call followed by the # key". Then just enter the number you like to call follow by the "#" key. You can also set up Speed Dial for ANI callback so that you don't need to punch in the whole phone number. This is how ANI callback works (please note there will be two call charges for ANI callback).
*Note: To use ANI callback your phone number must not withhold the number to the receiving end (e.g. not a "private" number). If your phone is a "private" number you can override it on a per call basis by prefix it with 1832. So if your phone is a private number, to initiate the callback you would dial 18320281881911 and then hangup on the busy signal. This override code should work on a Telstra or an Optus line. Or you can choose to ring your phone company to remove the CallerID supression on your phone line.